27
QUARTZ CERAMIC TOUCH WATCHES
WITH A SECOND TIME ZONE
WITHOUT DATE DISPLAY
CALIBER: 765
This watch has no crown. It is activated and
the time is set by touch only. This watch has
a 2nd Time Zone function, which is synchro-
nised with the main one.
TO SET THE MAIN TIME ZONE (MAIN DIAL)
1. Activating setting mode
Activation is always a two-step process to
avoid any unwanted changes in time setting.
1a. Touch the case at 10 o’clock until the
minute hand on the main dial moves slightly.
2 s
1b. Immediately slide your finger along the
right hand side of the case from top to bot-
tom. The minute hand moves slightly again
and the watch emits a small beep.
To Next Page
Loading...
