39
312:
Resetting the hands:
Pull out the crown into position 2 and press
pusher A to select the hand to be
repositioned. The selected hand moves.
Press pusher B to correct the position of the
hand.
Short push: Forward movement by one unit
Long push: Rapid forward movement of the
hand
538*, 542:
Initialization of the 30-minute totalizer hand:
Pusher B and crown in position 2
Initialization of the 60-second totalizer hand:
Pusher A and crown in position 3
Initialization of the 1/10th of a second hand:
Pusher B and crown in position 3
Short push: Forward movement by one unit
Long push: Rapid forward movement of the
hand
QUARTZ CHRONOGRAPH WATCHES
CALIBER: 370, 541
SCREW-IN CROWN
Certain models are fitted with a screw-in
crown. With these models, the crown must
be unscrewed before using it to adjust any
settings. Following any adjustments, the
crown must be returned to position 1 and
screwed back in. Position 1 is the starting
point for all manipulations of the crown
on all models.
THE CROWN HAS 3 POSITIONS
1. Normal position
When pressed in against the case
(position 1) or screwed in, the crown
ensures that the watch is water-resistant
(if not damaged).
To Next Page
Loading...
