55
3. To set the time
Pull the crown out to position 3 and turn
it forwards or backwards to the desired
time. Accept by pushing the crown back to
position 1 to coincide with
a given time signal.
Chronograph functions
Timing to within 1/4th of a second for
up to 12 hours.
Make sure the chronograph hands are
at zero (Pusher B).
Pusher A: Start – stop, start – stop etc.
Pusher B: Reset (after a stop).
SELF-WINDING CHRONOGRAPH
WITH DATE
CALIBERS: 603, 674*
* On certain models this movement has no
display of the date.
THE CROWN HAS 3 POSITIONS
1. Normal position
When pressed in against the case
(position 1), the crown ensures that the
watch is water-resistant (if not damaged).
2. To set the date
Pull the crown out to position 2, turn
it forwards to set the desired date.
Push the crown back to position 1.
NOTE: Date setting is not recommended
between 8 pm and 2 am.
To Next Page
Loading...
