RADVision SCOPIA XT1000 Piccolo - Making Calls; Making a Call; Dialing a New Number

6
Making Calls | 29
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Making Calls
You can make a video call on the SCOPIA XT Series in several ways. This chapter outlines how to
dial to other endpoints in different modes, and how to answer and terminate a call.
• Making a Call.................................................................................... page 29
• Answering a Video Call........................................................................ page 31
• Ending a Call.................................................................................... page 32
Making a Call
•
Dialing a New Number......................................................................... page 29
• Redialing the Number ......................................................................... page 30
• Dialing from the Phonebook.................................................................. page 31
Dialing a New Number
Perform the procedure in this section to dial a number for the first time.
You can change these default call settings:
• Call protocol—Choose the protocol: H.323, SIP or ISDN.
• Call rate—By default, the system uses the maximum available bandwidth.
• Call type—Choose the call type: Audio-Video or Audio.
After you dial a number, it is listed in the list of dialed numbers.
If you manage your SCOPIA XT Series remotely using web interface, you can dial a number
remotely by accessing the web interface and navigating to Make your call > Direct call > Basic
options.
Procedure
Step 1 Dial number using the XT Remote Control Unit.
Step 2 (Optional) To change the default call settings:
a. Select the Advanced options button .