Making Calls | 32
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
If you set your system to manual answering, you can either accept or reject the incoming call.
When there is an incoming call, the system displays a window with these options:
• To accept the call, press Accept or on the XT Remote Control Unit.
• To reject the call, select the Reject option on the screen by pressing the right arrow key and
on the XT Remote Control Unit.
• To reject the call and set the system to automatically reject all further incoming calls without
asking any more, select the Do not disturb option on the screen by pressing the right arrow
key twice and on the XT Remote Control Unit.
For information about setting the system to answering calls automatically, see “Enabling
Automatic Answering” on page 19.
Ending a Call
Procedure
Step 1 Press on the XT Remote Control Unit.
Step 2 Press to confirm, if your system is set to Confirm disconnection.
To Next Page
Loading...
