RADWAG R Series

To Next Page

To Previous Page

- 2 -

If you are reading this, it means that you are bound to achieve success. You have purchased

a device that was designed and manufactured to give you years of service.

Congratulations and thank you for selecting RADWAG product.

APRIL 2019

Main Page

Table of Contents3
General Information6
Dimensions6
Connectors7
Connection Cables - Diagrams7
PS R2.H Series7
Intended Use9
Inappropriate Use9
Warranty9
Metrological Parameters Monitoring9
User Manual Significance9
Balance User Training9
TRANSPORT and Storage10
Delivery Checklist10
Package10
Unpacking and Installation10
Place of Use and Assembling10
Unpacking10
Standard Delivery Components List10
Settings12
Maintenance Activities12
Powering the Device14
Connecting Additional Hardware15
Information on the Balance15
Keyboard - Buttons Function15
Start-Up16
Temperature Stabilization Period16
Ambient Conditions State Indication16
User Menu16
Logging18
Units19
Temporary Measuring Unit19
Units Accessibility19
Start Unit Selection20
Custom Unit20
Miscellaneous Parameters21
Adjustment23
Internal Adjustment24
Adjustment Menu Settings24
Manual Adjustment25
Internal Adjustment25
External Adjustment25
User Adjustment25
Adjustment Report Printout26
Determining Printout Content26
Adjustment Report26
Header, Footer, GLP Printouts27
Non-Standard Printouts28
Inserting Text29
Variables30
Databases31
Users31
Products32
Tares33
Weighings33
ALIBI Memory34
Export and Import of Databases35
Database Esport36
Database Import36
Measurement Data Printout36
Working Modes37
Working Modes Accessibility38
Weighing Operation38
Good Weighing Practice38
Balance Zeroing39
Balance Taring40
Weighing Profiles41
WEIGHING Mode Settings - Readout41
Autotare43
Print Mode44
Information45
Non-Standard Information46
F Shortcut Keys46
Dual Range Balance (PS 200/2000.R2; MS 200/2000.R2)47
Under-Pan Weighing48
Counting Parts of the same Mass48
PARTS COUNTING Mode Settings49
Setting the Reference Mass: Mass Determination from the Sample of Known49
Quantity49
Setting the Reference Mass: Entering Mass Value50
Checkweighing50
Declaring Threshold Values50
Dosing51
Setting Target Mass: Entering Mass Value51
Percent Weighing Control with Relation to Reference Mass52
Setting the Reference Mass: Weighing Reference Sample52
Setting the Reference Mass: Entering Mass Value53
Animal Weighing53
Additional Settings54
Running the Process Manually - Means of Operation54
Running the Process Automatically - Means of Operation55
Density of Solids55
Density Determination57
Density of Liquids59
Density Determination59
Statistics60
Means of Operation61
Deleting Statistics62
Totalising63
Additional Settings63
Means of Operation63
Peak Hold64
Means of Operation65
Adding65
Pipettes Calibration67
Additional Settings of Pipettes Calibration Mode68
Means of Operation68
Communication71
RS 232 Ports Settings (COM)71
WIFI Port Settings71
Port USB72
Peripheral Devices75
Computer75
Computer Connection Port75
Continuous Transmission76
Printouts Interval for Continuous Transmission77
Cooperation with E2R77
Printout77
Printer77
Barcode Reader79
Additional Display80
External Buttons80
Cooperation with Peripherals81
Transferred Data Format81
Format of Data Sent on Pressing Print Button82
Response Format82
Communication Protocol83
List of Commands83
Responce Format84
Error Messages97
Additional Ecquipment97

RADWAG R Series

Table of Contents

Related product manuals