What to do if RADWAG Scales do not switch on?
If your RADWAG Scales don't switch on, it could be due to a discharged battery. Try connecting the scale to the mains to charge the battery. Alternatively, the issue might be due to missing or incorrectly installed batteries. Ensure the batteries are installed correctly, paying attention to the correct polarization.
Why do RADWAG Scales switch off automatically?
If your RADWAG Scales are automatically switching off, it's likely due to the parameter being set to a value that enforces shutdown after a specific time. To resolve this, navigate to the 'Othr' menu and set the parameter to 'nonE'.
General| Readability | 0.01 g |
|---|---|
| Display | LCD (backlit) |
| Calibration | External |
| Interface | RS 232 |
| Protection class | IP 43 |
| Maximum capacity | 2000 g |
| Pan size | 128 mm |
| Power supply | 100-240 V AC 50/60 Hz |
| Tare range | -2000 g |
| Stabilization time | 3 s |
| Operating temperature | +15 to +30 °C |
General safety and operational guidelines for the scale.
Instructions for properly leveling the weighing instrument.
Guide to connecting the scale to the main power supply.
Rules for accurate and reliable weighing.
How to perform taring operations for net weight.
Procedure for external calibration using weights.
Steps for user-initiated calibration.
How to perform manual internal scale calibration.
Explanation of automatic internal calibration triggers.
Setting the interval for automatic internal adjustments.
Performing a test to verify calibration accuracy.
Configuration for the first RS232 port.
Configuration for the second RS232 port.
Instructions for installing USB B drivers and connecting PC.
Settings for connecting the scale to a computer.
Entering the mass of a single part for counting.
Determining sample mass by weighing a reference quantity.
Setting minimum and maximum thresholds for checkweighing.
Setting reference mass by weighing.
Setting reference mass by manual input.
How to perform peak hold measurements.
Procedure for summing multiple weighings.
How to perform weighings of unstable subjects.
Configuration of input functions.
Configuration of output functions.
To Next Page
