19ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
Set Station Watering Times
You can set any station to run from 0 to 12 hours. For the first
two hours, you can set the watering time in one-minute incre-
ments. For the remaining 10 hours, you can set the watering
time in 10-minute increments.
➊ On 12-, 16-, 20-, and 24-station models, set the STA-
TIONS slide switch to the block of stations you want to set.
➋ Turn the dial to the station number you want in the
WATERING TIME PER STATION section of the dial.
➌ The display shows the program, the station number, and
the currently set watering time. If the station has been
included in another program, USED appears in the
display.
NOTE: If USED appears, you can still set a watering
time for the station unless the station has been
previously assigned to the D-drip program. Stations
assigned to the D-drip program cannot be used by
any other program.
To Next Page
Loading...
Need help?
General
