22 ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
➐ Press ñ or ò to set the start time. Start times are
available in 15-minute intervals throughout the day.
To eliminate a start time, leave the dial on PROGRAM START
TIMES. Choose the start time to be deleted and push MAN.
START / ADVANCE until the time flashes. Then press the ñ or
ò buttons until the LCD displays the OFF setting, located
between 11:45 p.m. and 12:00 a.m. (between 23:45 and 24:00
for International models).
NOTE: Start times appear in chronological order. If you
delete a start time by setting it to OFF, all later start
times are automatically moved down one start time
number.
When you set a start time for any start time number,
the controller automatically reorganizes the start times
so they appear in chronological order. The earliest
start time will be number 1, and the latest start time will
be number 6. This reorganizing only occurs after you
move the dial off the PROGRAM START TIMES
position.
➑ If you want to set additional start times, press MAN.
START/ ADV. Repeat steps 2 - 7 to set the next start time.
➒ Turn the dial to AUTO.
To Next Page
Loading...
Need help?
General
