Raisecom Technology Co., Ltd
62
10.6.1. Receive State Query
In state information query menu press number key 1 there will be the following
information:
Input Group No.(1-4, Esc=Cancel):
Enter group number 1, there will receive signal status information:
First Group Receive State
Channel 1 2 3 4 5 6 7 8
state 0 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
8 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16
16 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24
24 25 | 26 | 27 | 28 | 29 | 30 | 31
State Query Command:1-2, Menu Display:M, Return:Q Command:
Note: the data in each cell is hex and refer to receive signal information of user board,
through this command you can get the device work status.
10.6.2. Transmit State Query
In state information query menu press number key 2 there will be the following
information:输 Input Group No.(1-4, Esc=Cancel):1
Enter group number 1, there will transmit signal status information:
First Group Transmit State
Channel 1 2 3 4 5 6 7 8
state 0 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
8 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16
16 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24
24 25 | 26 | 27 | 28 | 29 | 30 | 31
State Query Command:1-2, Menu Display:M, Return:Q Command:
Note: the data in each cell is hex and refer to transmit signal information of user
board, through this command you can get the device work status.
10.7. Alarm Query menu
In main menu press number key 4, there will be alarm query menu:
1.Device Alarm
2.System Alarm
Alarm Query Command:1-2, Menu Display:M, Return:Q Command:
10.7.1. Device Alarm
In alarm query menu press number key 1 there will be present device alarm information:
Device Alarm:
1E1 Alarm: LOMF, CRC
To Next Page
Loading...
Need help?
General
