MTR221/A - MTR221/A DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
Modello/Model R221/A - R221/A DHHS
DESCRIPTION
7
R221/A - R221/A DHHS - Description
Ralco srl
RO 001/A Fixed mounting flange, 20 mm thickness
RO 002 Spacers for mounting flange; 1.5 mm thickness
RO 041 Mylar mirror, inherent filtration 0.3 mm Al equivalent
RO 051 Rotating mounting flange, 18 mm thickness, 136 mm diameter
RO 058 Rotating mounting flange, 18 mm thickness, 140 mm diameter
RO 063
Final control testing (light intensity, light field/radiation field alignment,
radiation leakage, light field border contrast ratio, general funcitonality and
electronic)
RO 074 Customized external cover color
RO 077 Potter Bucky light centering device (BL)
RO 082 Mirror 0.8 mm thickness, filtration equivalent 1 mm Al
RO 096 Customized wiring
RO 107 Customized knobs
RO 109 Customized cover
RO 111 Personalized front panel
RO 202 Top auto-centering plate for fixed metal flange
RO 240 Focus-skin spacers, preventing X-ray exposure too close to the patient
RO 242/1 Single laser aligning the collimator to the Potter Bucky with power supply
included
RO 253 Plastic spacer guides to assemble DAP
RO 258 Additional variable filtration through three filters on rotating support 1 mm Al +
(0.1 mm CU O 0.2 mm CU O 2 mm Al), manual selection
RO 258/1 Additional variable filtration through three filters on rotating support 1 mm Al +
(0.1 mm CU O 0.2 mm CU O 0.3 mm CU), manual selection
RO 318 Auto-centering top plate with coupling for plastic flange allowing rotation of the
collimator, the plastic flange is included
RO 333 White LED
RO 336 Aluminium accessory guides
RO 339 Device equipped with 2 lasers for optical SID
RO 382 LED on front panel
RO 441 Plastic flange with a notch rotating +/- 50°, 20 mm thickness without stop
(available only for collimators assembled with RO 318)
RO 442 Plastic flange with a notch rotating +/- 90°, 20 mm thickness without stop
(available only for collimators assembled with RO 318)
To Next Page
Loading...
