Ralco MTR 221/A - Components Not Covered by this Warranty; Disassembly; Transport and Storage

MTR221/A - MTR221/A DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
Modello/Model R221/A - R221/A DHHS
GENERAL
57
R221/A - R221/A DHHS - General
Ralco srl
The warranty applies provided the product has been handled properly in accordance with its
operating instructions; presentation is required of the original invoice indicating the date of
purchase, the model and serial number as well as other documents originally supplied with the
set.
Exemptions:
• If unit documents have been altered in any way or made illegible;
• If the model or production number on the product has been altered, deleted, removed or
made illegible;
• If repairs or product modifications and alterations have been performed by unauthorized
and unqualified persons;
• If unauthorized repairs and/or modifications have been performed;
• To damage caused by misuse or neglect, incorrect installation or accidental damage
including but not limited to lighting, water or fire;
• To use of unoriginal spare parts and accessories.
In-warranty spares will be available only upon return to Ralco, at the customer's expense, of
the parts considered to be faulty to allow Ralco to assess the cause of the fault.
COMPONENTS NOT COVERED BY THIS WARRANTY
• Consumable items such as lamps.
Items not produced by Ralco; these items will be accorded to warranty granted by the
constructor:
• Motors: 1 year
• Potentiometers: 1 year
• Electronic Boards: 1 year
• Laser: 1 year
DISASSEMBLY
• Disconnect supply to the collimator.
• Remove the cover and disconnect the supply cables.
• Loosen the fixing Allen screws on the upper part of the collimator connected to the flange
mounted to the X-ray tube.
TRANSPORT AND STORAGE
• Suitable packing must be provided for the collimator.
• Place the collimator in a plastic bag to avoid packing material from entering the collimator.
• Use an appropriate packing for transport, shipment or storage; the collimator must be
protected from rough handling. This will avoid damage to the collimator during transport,
shipment or storage.
• Limit Storage conditions:
• Ambient Temperature = from -40°C to +70°C
• Relative Humidity = from 10% to 95%
CARE MUST BE TAKEN NOT TO LET THE COLLIMATOR FALL.