EasyManuals Logo

RAM ProMaster2015 User Manual

RAM ProMaster2015
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
JUMP-STARTING
Preparations For Jump-Starting
NOTE:
Only use the recommended jump starting location.
The vehicle’s jump starting locations are located under the hood in the engine
compartment on the driver’s side.
The Remote Positive (+) Post is covered with a protective cap located on the side
of the Front Power Distribution Center.
The Remote Negative (-) Post is located on the core support closest to the front of
the vehicle.
Jump-Starting Procedure
If frequent jump-starting is required to start your vehicle you should have the battery
and charging system inspected at your authorized dealer.
Connecting The Jumper Cables
1. Connect the positive (+) end of the jumper cable to the remote positive (+) post
of the discharged vehicle.
2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post
of the booster battery.
Remote Battery Posts
1 Remote Positive (+) Jump Starting
Post
2 Remote Negative (-) Jump Starting
Post
WHAT TO DO IN EMERGENCIES
98

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RAM ProMaster2015 and is the answer not in the manual?

RAM ProMaster2015 Specifications

General IconGeneral
BrandRAM
ModelProMaster2015
CategoryAutomobile
LanguageEnglish

Related product manuals