Clock Setting
1. To start the clock setting procedure, push the SETTINGS button on the right
side of the display, then “Clock & Date” button on the touchscreen, and then “Set
Time & Format” button on the touchscreen. Select the up or down arrows as
appropriate.
2. Press the “Up or Down arrows” to adjust the hours or minutes, next select the AM
or PM button on the touchscreen. You can also select 12hr or 24hr format by
pressing the desired button on the touchscreen.
3. Once the time is set press the “Done” or “back arrow” button on the touchscreen
to exit the time screen.
NOTE:
Once the time has been set on the radio, the time will also appear in the Electronic
Vehicle Information Center (EVIC).
Equalizer, Balance And Fade
1. Push the SETTINGS button on the right side of the display.
2. Scroll down and press the “Audio” button on the touchscreen to open the Audio
menu.
3. The Audio Menu shows the following options for you to customize your audio
settings.
Equalizer
• Press the “Equalizer” button on the touchscreen to adjust the Bass, Mid and
Treble. Use the “+” or “-” buttons on the touchscreen to adjust the equalizer to
your desired settings.
Balance/Fade
• Press the “Balance/Fade” button on the touchscreen to adjust the sound from the
speakers. Use the “arrow” buttons on the touchscreen to adjust the sound level
from the front and rear or right and left side speakers. Press the Center “C” button
on the touchscreen to reset the balance and fade to the factory setting.
Speed Adjusted Volume
• Press the “Speed Adjusted Volume” button on the touchscreen to select between
OFF, 1, 2 or 3. This decreases the radio volume relative to a decrease in vehicle
speed.
Loudness
• Press the “Loudness” button on the touchscreen to select the Loudness feature.
When this feature is activated it improves sound quality at lower volumes.
ELECTRONICS
36
To Next Page
Loading...
Need help?
General
