Equalizer, Balance And Fade
• Adjust Equalizer of bass and treble
• Balance left/right (BALANCE) and front/rear (FADER)
• Strengthen sound (loudness)
Equalization
• Push the AUDIO button for more than two seconds to access equalization: ROCK,
CLASSIC, POP, VOCAL, JAZZ, USER or FLAT.
• Pushing AUDIO more than once changes equalization options. If this button is not
pushed again for five seconds or the ROTARY is pushed, the display returns to the
previously selected view and the adjustments made is saved.
Balance, Fade, Loudness, Bass And Treble
• Pushing the AUDIO button for less than two seconds accesses an audio function.
• Pushing AUDIO more than once accesses other functions (e.g. Bass, Treble,
Balance, Fader, Loudness and Bass). If this key is not pushed again for five
seconds or the ROTARY is pushed, the display returns to the previously selected
view and the adjustments made is saved. The Bass and Treble functions are only
accessible if the USER EQ has been selected.
Radio Operation
Seek Up/Seek Down
• Push the “double arrows” to the left for less than two seconds to seek down to the
next station. Push the “double arrows” to the right for less than two seconds to
seek up to the next station.
• Hold either button to bypass stations without stopping.
Store Radio Presets Manually
1. Tune to the desired station.
2. Push and hold the desired numbered memory button (1 through 6) for more than
three seconds.
USB/MP3 Audio Jack
USB/iPod
®
Mode is entered by inserting a USB Jump Drive or an iPod
®
cable into the
USB port.
CAUTION!
To remove devices connected to the USB port, first select the other audio source.
Failure to follow this procedure can cause damage to the connected device. Due
to the extensive range of makes and models of storage devices available on the
market, not all devices have compatibility required for proper functioning of Car
Radios. Use only quality USB devices.
ELECTRONICS
34
To Next Page
Loading...
Need help?
General
