MESSAGE DESCRIPTION
Manual Mode Not Available MANUAL (M) mode is not available, due
to a fault or other condition. Use the
DRIVE (D) position to operate the vehicle.
Contact your authorized dealer if the mes-
sage continues to appear.
Automatic Mode Not Available Automatic (DRIVE) mode is not available
due to a fault or other condition. Use
MANUAL (M) mode to operate the ve-
hicle.
Contact your authorized dealer if the mes-
sage continues to appear.
Clutch Overheating This message appears, together with a
buzzer, when the clutch overheats.
In this situation, limit stop and go driving
and gear shifts or if necessary stop the
vehicle and turn the engine off to allow
the clutch to cool.
If the message continues to appear, con-
tact your Authorized Dealer.
To avoid clutch failure, do not use the
accelerator to keep the vehicle at a stand-
still (for example holding on a hill); the
clutch could be damaged by overheating.
Use the brake pedal instead and operate
the accelerator only when you are ready to
drive away.
Press Brake Pedal Delayed Startup This messages appears when the key is
first turned ON, if the brake is fault
and/or the shift lever is not in NEUTRAL
(N). The shift lever must be in the NEU-
TRAL (N) position, and the brake pedal
must be pressed, to allow engine crank-
ing. Place the shift lever in NEUTRAL (N)
and apply the brake pedal BEFORE turn-
ing the key to the START/AVV position;
otherwise, the engine will not crank and
the key must be cycled OFF, then back
on, before cranking is allowed.
Gear Not Available This message appears, along with a warn-
ing buzzer:
• When it is not possible to change gear
due to a fault in the system.
• When, due a fault in the system, it is
only possible to engage 1st (1), 2nd
(2), 3rd (3) or reverse (R).
Contact your authorized dealer if the mes-
sage continues to appear.
DIESEL
68
To Next Page
Loading...
Need help?
General
