R&S EB500 - Rear-Panel Tour

Operation
R&S
®
EB500
17Getting Started 4072.8432.02 ─ 04
2.2 Rear-Panel Tour
The various inputs and outputs located on the rear panel of the R&S EB500 are
briefly explained in the paragraphs below.
In the following overview, the index numbers refer to the labels in the figure above.
1. X1 Power Supply.
Standard
Speakon NL4FX socket for DC power input. Socket accepts 10~32 VDC
on pin 1+ and ground on pin 1- of connector. Power requirement as indicated.
2. Antenna Inputs.
● X13 Antenna input for HF/V/UHF bands 9 kHz to 6 GHz.
● X14 Antenna input for HF band 9 kHz to 32 MHz.
3. X7 LAN Port.
A 10/100/1000Base-T port for remote control via LAN.
4. Miscellaneous I/O.
Rear-Panel Tour