R&S EB500 - Using GUI (EB500 with Front Control Panel or Remote Access GUI)

Software and Firmware Update
R&S
®
EB500
70Getting Started 4072.8432.02 ─ 04
4.5.2 Using GUI (EB500 with front control panel or Remote
Access GUI)
The
IP address of the R&S EB500 is needed during the GUI Installation for Remote
Access. This can be obtained from the front panel of the EB500 with front control
panel with the key sequence SETUP -> "Config" -> "Network". Refer to the Oper-
ating Manual for more details.
Changing the IP Address