R&S EB500 - Correction Data ( R&S EB500-COR)

Operation
R&S
®
EB500
44Getting Started 4072.8432.02 ─ 04
WDF Application Mode
All
the DF-related features are accessible through the WDF application mode.
Refer to the operating manual for a detailed explanation.
2.4.9
Correction Data ( R&S EB500-COR)
Correction data is used to compensate for certain factors which have their origins
outside
the R&S EB500 and affect the measurement results. The correction data is
stored within the flash file system of the R&S EB500.
The R&S EB500-COR can process the correction data for correcting Antenna fac-
tors, cable attenuation, azimuth correction and omniphase correction.
Refer to the operating manual for a detailed explanation.
Options for the R&S EB500