Operation
R&S
®
EB500
39Getting Started 4072.8432.02 ─ 04
5. Configure for a fixed system. For this reason use the compass reading to set
the North correction. First click "Reset North Correction"
.
6. After that click "Set North Correction".
7. The compass reading has been transferred to the antenna's North Correction.
8. The fixed system has been configured and the compass will be disabled.
9. Press ESC to close the dialog.
Direction Finding Procedure
Direction Finding operation mode, combined with a direction finding antenna, allows
identifying the origin of a signal: the direction from where a signal is transmitted.
1. Press the APPL key to open the application selection softkeys.
Options for the R&S EB500
To Next Page
Loading...
