Preparation for Use
R&S
®
EB500
7Getting Started 4072.8432.02 ─ 04
Risk of injury
The
feet may fold in if they are not folded out completely or if the R&S EB500
is shifted. The feet may break if they are overloaded. Fold the feet completely
in or completely out to ensure stability of the R&S EB500 and personal safety.
To avoid injuries, never shift the R&S EB500 when its feet are folded out. The
overall load (the R&S EB500's own weight plus that of any devices stacked
on top of it) on the folded-out feet must not exceed 500 N. Place the
R&S EB500 on a stable surface. Secure any devices stacked on top of it
against slipping (e.g. by locking their feet on the top front frame). When the
R&S EB500 is standing on its folded-out feet, do not work under it and do not
put anything under it as this would pose a risk of personal injury or material
damage.
The R&S EB500 can be used in any of the positions shown here.
Setup
To Next Page
Loading...
