Command reference
R&S
®
ZNA
1262User Manual 1178.6462.02 ─ 20
Suffix:
<Ch>
.
Channel number
Parameters:
<Boolean> ON (1)
METAS calibration active
OFF (0)
METAS calibration inactive
Options: R&S ZNA-K50
Manual operation: See "METAS Cal Active" on page 587
7.3.14.10
[SENSe:]CORRection...
The [SENSe:]CORRection... commands control the system error correction, the
measurement receiver (power) calibration and the noise figure calibration.
[SENSe:]CORRection:COLLect:AUTO:CKIT...................................................................1264
[SENSe:]CORRection:COLLect:AUTO:CKIT:PASSword................................................... 1265
[SENSe:]CORRection:COLLect:AUTO:CKIT:PORTs........................................................ 1265
[SENSe:]CORRection:COLLect:AUTO:CKIT:PORTs:ADD................................................ 1266
[SENSe:]CORRection:COLLect:AUTO:MCONnect.......................................................... 1267
[SENSe:]CORRection:COLLect:AUTO:PORTs:CONNection?........................................... 1267
[SENSe<Ch>:]CORRection:COLLect:AUTO:TERMination................................................1268
[SENSe:]CORRection:COLLect:AVERage...................................................................... 1268
[SENSe:]CORRection:COLLect:CHANnels:ALL.............................................................. 1268
[SENSe<Ch>:]CORRection:COLLect:CHANnels:CSETup................................................ 1269
[SENSe:]CORRection:COLLect:CHANnels:MCTYpes...................................................... 1269
[SENSe<Ch>:]CORRection:COLLect:DETector...............................................................1271
[SENSe:]CORRection:COLLect:FIXTure:LMParameter[:STATe]........................................ 1271
[SENSe:]CORRection:COLLect:FIXTure:LMParameter:LOSS[:STATe]...............................1271
[SENSe:]CORRection:COLLect:PMETer:ID.....................................................................1272
[SENSe:]CORRection:IMEThod.....................................................................................1272
[SENSe<Ch>:]CORRection[:STATe]...............................................................................1272
[SENSe<Ch>:]CORRection:COLLect[:ACQuire]:SELected............................................... 1273
[SENSe<Ch>:]CORRection:COLLect:AUTO................................................................... 1275
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:ALL:COUNt?.............................1276
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:COUNt?................................... 1276
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DEFine:DEFault........................ 1276
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DEFine:TPORt:DEFault............. 1277
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DELete:ALL..............................1278
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:ACQuire..........................1278
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:DEFine........................... 1278
[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:DEFine:TPORt.................1280
[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure..................................................1280
[SENSe<Ch>:]CORRection:COLLect:AUTO:CPORt........................................................ 1282
[SENSe<Ch>:]CORRection:COLLect:AUTO:MIXer..........................................................1282
[SENSe<Ch>:]CORRection:COLLect:AUTO:PORTs........................................................ 1283
[SENSe<Ch>:]CORRection:COLLect:AUTO:PORTs:TYPE...............................................1284
[SENSe<Ch>:]CORRection:COLLect:AUTO:POWer........................................................1285
SCPI command reference
To Next Page
Loading...
