Rangemaster Elan 110 - Final Fitting; Customer Care

28
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
Final Fitting
Fitting the Plinth
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and t each end keyhole over their respective screws. Tighten
the xing screws (Fig.7-16).
Fitting the Splashback
The cooker can be installed with or without the supplied
splashback.
Position the splashback on the rear of the hotplate and secure
with the screws supplied.
Customer Care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
ArtNo.281-0026 - Front plinth
Fig.7-16