GB-NL-F-45
CUTTING PERFORMANCE
The cuts per metre (cuts per yard) are dependant upon the forward speed of the machine. The figures quoted in
the cutting ratio charts are given with the variable cylinder speed set at maximum.
CUTTING RATIO (METRIC)
Forward cuts per metre
speeds
km/hr 4-Knife 6-Knife 8-Knife 11-Knife
12 16 24 32 44
9 24 36 48 66
6 32 48 64 88
7.5 15 22 30 40
5.6 22 33 44 60
3.7 29 44 60 80
CUTTING RATIO (IMPERIAL)
Forward cuts per yard
speeds
m.p.h. 4-Knife 6-Knife 8-Knife 11-Knife
GB
CUTTING PERFORMANCE (AREA)
3.2 hectares/hr. at 12.5 km/hr. (8 acres/hr. at 7.5 mph)
Allowance is included for normal overlaps and turning at the end of each cut.
7.5 2.4 1.6 1.2 0.9
5.6 1.6 1.1 0.8 0.6
3.7 1.2 0.8 0.6 0.5
CUTTING RATIO (IMPERIAL)
Forward inch clip
speeds
m.p.h. 4-Knife 6-Knife 8-Knife 11-Knife
To Next Page
Loading...
