GB
GB-F-NL-14
RANSOMES T-PLEX 180
OPERATORS MANUAL
DIMENSIONS
Width of cut: 1.8 metres (71in)
Overall width: 1.92 metres (75 9/16in)
Overall width:
(transport) 1.92 metres (75 9/16in)
Overall height: 1.13 metres (44 7/16in)
(Std Seat)
1.3 metres (51 3/16in)
(Delux Seat)
Overall length
without catchers: 1.864m (73 3/8in)
Overall weight of
machine: 601kg
VIBRATION LEVEL
The machine was tested for whole body and hand/
arm vibration levels. The operator was seated in the
normal operating postion with both hands on the
steering mechanism. The engine was running and
the cutting device was rotating with the machine
stationary.
Hand / Arm acceleration level : 1.27 m/s
2
Whole body acceleration level
X axis : 0.047 m/s
2
Y axis : 0.700 m/s
2
Z axis : 0.406 m/s
2
RECOMMENDED LUBRICANTS
Engine oil: Conforms to MIL-L-2104C of
A.P.I. Classification SE/SF/SG.
TEMPERATURE OIL VISCOSITY
ABOVE 4°C (39°F) SAE30
BELOW 4°C (39°F) SAE5W-30 or 10W-30
Hydraulic Oil: Harvella 10W-30 multigrade
engine oil.
Grease: Shell Darina R2, or equivilant
To Next Page
Loading...
