GB
GB-F-NL-56
RANSOMES T-PLEX 180
OPERATORS MANUAL
To Adjust:
The position of the adjusting lever is on the right
hand side of the seat below the seat cushion (B
Fig.31). By moving the lever away from the seat, the
seat can be slid backwards and forwards. When in
the desired position release the lever to locate in one
of the pre set positions.
3. BACK REST ADJUSTMENT
The back rest has three preset positions
To Adjust:
The position of the adjusting lever is on the front of
the seat cushion. Lift the lever upwards and shift the
seat cushion forwards to lower the back rest, shift
the seat cushion rearwards to raise the back rest.
NOTE:The seat is fitted with a microswitch to sense
operator presence.
2. FORE AND AFT ADJUSTMENT
To Next Page
Loading...
