Rapid Connect - Page 21

4:9 Rapid Connect Monitoring System 2023-05-03
4. PORTAL
4.8. Whatdoesthewidgetsonthemachinelevelmean?
“Temperature” shows the currently monitored temperature. The level for warning and overheating
is set in the machine’s template.
The chart can be zoomed into, by dragging a rectangle over the period that you wish to inspect.
Thelabelsunderneaththechartisclickable,andallowsforvisualationofspecicparameters.
Youcanreceiveanotication,ifthetemperatureinthecutterhousinghasreachedthelevelfor
warningand/oroverheating.Seesection5.5“HowdoIenablenotications?”onpage5:5.
Thevibrationchartshowsthemachine’svibrationsduringthespeciedinterval.Thevibrationchart
shows vibrations that have occurred along the machine’s X-axis (horizontal vibrations) and Y-axis
(vertical vibrations). The vibration chart shows low-frequency and high-frequency vibrations.
The chart can be zoomed into, by dragging a rectangle over the period that you wish to inspect.
Thelabelsunderneaththechartisclickable,andallowsforvisualationofspecicparameters.
Youcanreceiveanotication,ifthevibrationlevelsinthemachinearetoohigh.Seesection5.5
“HowdoIenablenotications?”onpage5:5.