Rapid Connect - Page 22

INSTRUCTION MANUAL IB 109050 02 C03b
4:10
4. PORTAL
4.8. Whatdoesthewidgetsonthemachinelevelmean?
“Stand-by” indicates that the machine is connected to a power supply, but is not running.
“Idle” indicates that the machine is connected to a power supply, is running, but is not processing
material.
“Produce” indicates that the machine is connected to a power supply, and is processing material.
“Overload” indicates that the machine is connected to a power supply, is processing material, and
is overloaded.
The machine’s status is determined by the machine’s power consumption and vibrations.
Thelimitforeachmachinestatusisdenedinthemachine’stemplate.Thetemplateisdesigned
by Rapid before delivery of the machine.
Optionalwidgets
“Normal”, “Stop” and “Emergency” shows the percentage of each status that the machine has
beeninduringthespeciedinterval.Intheexampleabove,themachinehasbeenconnectedtoa
power supply and has been running.
“Normal” means that the machine is connected to a power supply, and is running.
“Stop” means that the machine is connected to a power supply, but has been stopped by the oper-
ator pressing the stop-button.
“Emergency” means that the machine is connected to a power supply, but has been stopped by
the operator pressing the emergency stop button, or by the overload protection tripping.