Rapid RH25L - Proper Handling and Transport; Optimal Installation Site Selection

3
Parameters of product range
Specification
Series / Model
PH /
RH(C)25L
PH /
RH(C)35L
PH /
RH(C)50L
PH /
RX(C)60Ls
PH /
RX(C)65Ls
PH /
RX(C)80Ls
Function
Heating capacity
kW(air 26℃, water 26℃)
10
13.5
17.5
25
28
33
C.O.P. (air26℃,water26℃)
6.6
7
6.7
6.92
6.8
6.8
Heating capacity kW
(air 15℃,water 26℃)
6.6
9.9
11.4
15.9
16.3
22.2
C.O.P. (air 15℃,water26℃)
4.64
4.78
4.68
4.71
4.94
5.16
Cooling capacity kW
(air 35℃,water 28℃)
6
8
10
15
16
20
C.O.P. (air35℃,water28℃)
4
4
3.8
4.2
4.2
4
Power supply
230-240V/1Ph/50Hz
380-415V/3Ph/50Hz
Rated Input power kW
1.4
2.1
2.4
3.4
3.3
4.3
Rated Input current A
6.5
9.5
11.4
5.5
7.3
9.2
Advised water flux m³/h
4-6
5-7
6.5-8.5
7-9
8-10
10-12
Water pipe in-out spec mm
50
50
50
50
50
50
Net weight / Gross weight Kg
60/69
70/79
73/82
105/117
121/136
123/138
*C.O.P: Coefficient of performance
Note:
1. Mode RH/RX~ is heating only, RHC/RXC is heating and cooling optional. For heating only, please ignore the
parameters of cooling capacity and cooling C.O.P, other parameters are the same with the heating and cooling type
2. This product can work well under air temp +0 ℃ ~43℃. Performance cannot be guaranteed outside the
operating ranges and must take account the exterior conditions of use identified to select suitable mode
(such as location, volume of swimming pool, and numbers of swimmer.)
3. Above parameters are subjected to adjustment periodically for technical improvement with further notice.
Please refer to nameplate on each machine for accurate information.