Rapid RH25L - Electric Connection

6
2． The heater should be located on a solid, level and non-corrodible structure that is
capable of supporting the weight of the heat pump. It must be fixed by bolts (M10) to
concrete foundation.
3． The heat pump should be far from any source of combustibles and corrosive material to
Wrong installation
!!Warning:
Don’t install the heat pump close to
a wall or plants. And Never inside a
closed building!
!!Warning:
The machine must not be hung onto the
wall with soft pipe since the inlet/outlet
union on the machine can’t hold weight.
The machine must always be connected
with hard pipe!