Raritan PM Series - Configure Panel Mains Circuit

Power Meter Quick Setup Guid
e
16
QSG
-PMM-1A-v3.3.10-E  255-64-0004-00
Configure Panel Mains Circuit
1
Enter a name.
2
Select the circuit type:
Single Phase
Split Phase
3-phase
3
Enter the number of circuit
positions in the panel.
Select the panel layout: one or
two columns.
Select the circuit position
numbering style: sequential or
odd/even.
4
Enter the current rating (circuit
breaker rating) of the circuit.
5
Select the checkbox for each CT
installed.
Enter the CT rating. Ratings are
marked on the CT.
6
Click OK.