Raritan PM Series User Manual

DANGER!
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
 Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.
 This equipment must only be installed and serviced by qualified electrical personnel.
 Read, understand and follow the instructions before installing this product.
 Turn off all power supplying equipment before working on or inside the equipment.
 Any covers that may be displaced during the installation must be reinstalled before powering the
unit.
 Use a properly rated voltage sensing device to confirm power is off.
 DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION
 Failure to follow these instructions will result in death or serious injury.
NOTICE
 This product is not intended for life or safety applications.
 Do not install this product in hazardous or classified locations.
 The installer is responsible for conformance to all applicable codes.
 Mount this product inside a suitable fire and electrical enclosure.
CAUTION
Safety Information

Raritan PM Series Specifications

General

Brand	Raritan
Model	PM Series
Category	Measuring Instruments
Language	English