Raritan PM Series User Manual

Chapter 4: Using SNMP
350
Downloading SNMP MIB
You must download an appropriate SNMP MIB file for successful SNMP
communications. Always use the latest SNMP MIB downloaded from the
current firmware of your BCM2.
You can download the MIBs from two different pages of the web
interface.
MIB download via the SNMP page:
1. Choose Device Settings > Network Services > SNMP.
2. Click the Download MIBs title bar.
3. Select the desired MIB file to download.
 -MIB: The SNMP MIB file for BCM2 power management.
 ASSETMANAGEMENT-MIB: The SNMP MIB file for asset
management.
 LHX-MIB: The SNMP MIB file for managing the LHX/SHX heat
exchanger(s).
4. Click Save to save the file onto your computer.
MIB download via the Device Information page:
1. Choose Maintenance > Device Information.
2. In the Information section, click the desired download link:
 -MIB
 ASSETMANAGEMENT-MIB
 LHX MIB
3. Click Save to save the file onto your computer.
Note: LHX-MIB is available only after the LHX/SHX support has been
enabled. See Miscellaneous (on page 303).

Raritan PM Series Specifications

General

Brand	Raritan
Model	PM Series
Category	Measuring Instruments
Language	English