Raritan PM Series User Manual

Chapter 5: Using the Command Line Interface
376
Asset Strip Settings
This command shows the asset strip settings, such as the total number
of rack units (tag ports), asset strip state, numbering mode, orientation,
available tags and LED color settings.
#
show assetStrip <n>
Variables:
• <n> is one of the options:
all , or a number.
Option
Description
all Displays all asset strip information.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific asset
strip number
Displays the settings of the asset strip connected
to the specified FEATURE port number.
For the BCM2 device with only one FEATURE port,
the valid number is always 1.
Rack Unit Settings of an Asset Strip
A rack unit refers to a tag port on the asset strips. This command shows
the settings of a specific rack unit or all rack units on an asset strip, such
as a rack unit's LED color and LED mode.
#
show rackUnit <n> <rack_unit>
Variables:
• <n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the BCM2 device with only one
FEATURE port, the number is always 1.
• <rack_unit> is one of the options:
all or a specific rack unit's index
number.
Option
Description
all Displays the settings of all rack units on the
specified asset strip.
Tip: You can also type the command without
adding this option "all" to get the same data.

Raritan PM Series Specifications

General

Brand	Raritan
Model	PM Series
Category	Measuring Instruments
Language	English