Raritan PM Series User Manual

Chapter 3: Using the Web Interface
163
Setting Default Measurement Units
Default measurement units are applied to all BCM2 user interfaces
across all users, including users accessing the BCM2 via external
authentication servers. For a list of affected user interfaces, see
User
Interfaces Showing Default Units (on page 163). The front panel display
also shows the default measurement units.
Note: The preferred measurement units set by any individual user or by
the administrator on a per-user basis will override the default units in
the web interface and command line interface. See
Setting Your
Preferred Measurement Units (on page 162) or Creating Users (on
page
153).
To set up default user preferences:
1. Click User Management > Default Preferences.
2. Make changes as needed.
Field
Description
Temperature Unit
Preferred units for temperatures -- (Celsius)
or (Fahrenheit).
Length Unit Preferred units for length or height -- Meter or
Feet.
Pressure Unit Preferred units for pressure -- Pascal or Psi.
 Pascal = one newton per square meter
 Psi = pounds per square inch
3. Click Save.
User Interfaces Showing Default Units
Default measurement units will apply to the following user interfaces or
information:
• Web interface for "newly-created" local users when they have not
configured their own preferred measurement units. See
Creating
Users (on page 153).
• Web interface for users who are authenticated via LDAP/Radius
servers.
• The sensor report sent because of the "Send Sensor Report" action.
See
Send Sensor Report (on page 260).
• Front panel LCD display.

Raritan PM Series Specifications

General

Brand	Raritan
Model	PM Series
Category	Measuring Instruments
Language	English