Chapter 3: Using the Web Interface
Readings for each phase. Each phase is labeled with the CT
number.
Value contains the reading for the sensor.
State indicates if readings are normal, warning or critical.
Panel Mains Circuit Management
This section introduces the operations for a panel. For information on
the panel's sensor data, see
Viewing the Panel Data
(on page 101).
To access panel management options:
Click Power Meters in the menu, then select a panel. In the panel details
page, click the actions icon in the top right corner.
The following options are available:
• Edit Thresholds: See
Configure Thresholds
(on page 106).
• Configure: You can edit some details of the panel configuration.
See
Configure Panel Mains Circuit
(on page 32).
• Export Readings as CSV: See
Export Readings as CSV
(on page 113)
• Reset Active Energy: See below.
• Delete: Click Delete to delete this power meter.
To reset Active Energy:
Click Reset Active Energy to reset this panel's active energy reading to 0
(zero) Wh. Only users with the "Change PMC, PMB & PMM
Configuration" permission can reset active energy readings.
Tip: To reset all active energy readings simultaneously, see Resetting All
Active Energy. To reset a branch circuit's active energy, see
Panel
Branch Circuits Operations
(on page 105). To reset a Power Meter's
active energy, see
Power Meter Management
(on page 100).
To Next Page
Loading...
Need help?
General
