Raritan PM Series User Manual

Chapter 4: Using SNMP
349
Field
Description
Host The IP address of the device(s) you want to access.
This is the address to which notifications are sent
by the SNMP agent.
Port The port number used to access the device(s).
User ID User name for accessing the device.
 Make sure the user has the SNMP v3 access
permission.
Timeout The interval of time, in seconds, after which a new
inform communication is resent if the first is not
received.
 For example, resend a new inform
communication once every 3 seconds.
Number of Retries Specify the number of times you want to resend the
inform communication if it fails.
 For example, inform communications are
resent up to 5 times when the initial
communication fails.
Security Level Three types are available.
 noAuthNoPriv - neither authentication nor
privacy protocols are needed.
 AuthNoPriv - only authentication is required.
 authPriv - both authentication and privacy
protocols are required.
Authentication
Protocol,
Authentication
Passphrase,
Confirm
Authentication
Passphrase
The three fields are available when the security
level is set to AuthNoPriv or authPriv.
 Select the authentication protocol - MD5 or SHA
 Enter the authentication passphrase
Privacy Protocol,
Privacy
Passphrase,
Confirm Privacy
Passphrase
The three fields are available when the security
level is set to authPriv.
 Select the Privacy Protocol - DES or AES
 Enter the privacy passphrase and then confirm
the privacy passphrase
7. Click Save.

Raritan PM Series Specifications

General

Brand	Raritan
Model	PM Series
Category	Measuring Instruments
Language	English