Rath Multi-Line Command Center User Manual

Page 8
Setting the Date and Time
Page 9
Step 4
Apply AC power to the Distribution Module by connecting the supplied power cable from the Distribution
Module to the RATH® model RP7700104 or RP7701500 Power Supply.
Step 5
Turn on the Power Supply.
Step 6
All Distribution Module programming will be done from the Command Center handset.
1. Entering Program Mode
a. Dial 1#91
b. Enter Password: 7284
2. Program the time zone
a. Dial 1002 followed by the appropriate time zone code
Eastern Time Zone = 111
Central Time Zone = 112
Mountain Time Zone = 113
Pacic Time Zone = 114
b. Touch the GREEN button in the middle of the phone when nished
3. Program the date (month-day-year format):
a. Dial 1001 followed by the appropriate date (xx/xx/xxxx)
Example: for February 15, 2011 dial 02152011
b. Touch the GREEN button in the middle of the phone when nished
4. Program the time (military time including hour-minute-second):
a. Dial 1003 followed by the appropriate time (xx/xx/00)
Example: for 2:30 pm dial 143000
b. Touch the GREEN button in the middle of the phone when nished
5. To Exit Program Mode dial 00 followed by the GREEN button
Phone Programming
Step 7
Programming the phone line:
Option 1
Elevator Phone calls a number outside the building:
1. For the Elevator Phone to call a number outside the building, it must be programmed to rst dial 9,
Pause, Pause then the phone number
2. Follow the directions that came with the Elevator Phone to program Memory Location 1 to dial 9, Pause,
Pause then the digits of the outside phone number

Rath Multi-Line Command Center Specifications

General

Brand	Rath
Model	Multi-Line Command Center
Category	Emergency Phone
Language	English