30
DIVE SET for RATIO iX3M Tech+ & iX3M Reb
To navigate this menu follow the clues in the picture on the left.
Algorithm: Select the decompressive algorithm you want to use for your dive.
BUL: Bühlmann ZHL-16 B
VPM: VPM-B (go to the next page)
If the chosen Algorithm is BUL:
GFL/GFH:
set the Gradient Factor Low (GFL) e Gradient Factor High (GFH).
Attention: The GFL can NEVER be higher than the GFH.
It is possible to set the GFH from 20% to 100% ( 20% < GFH < 100% )
It is possible to set the GFL from 20% to GFH ( 20% < GFL < GFH )
Do you know what?: You can keep pressed the buttons C or D to change the iX3M data more rapidly.
ATTENTION: To change the Gradient Factor’s value a suitable theoretical
knowledge is needed.
DO NOT CHANGE THE GRADIENT FACTOR WITHOUT HAVING
RECEIVED A SUITABLE TRAINING.
The RATIO iX3M is not responsible for damages to people or objects due to a wrong
setting of such parametres.
Suggested protection levels are indicated at page 27 of this manual.
Do you know what?:
If you have any doubts on your device’s setting, you can set the company’s parametres from the menu DEFAULT
Do you know what?:
Generally speaking, reducing the GFH involves a computer increasing conservatism. The GFL’s reduction
involves a shift towards a major depth of the first compulsory decompressive stop.
Do you know what?:
With the RATIO iX3M it is possible to change the value GFL/GFH while diving, to manage possible emergencies.
A
b
To reach this menu from the main
screen press in sequence:
DIVE SETTINgS
ALGORITHM:
GFL/GFH:
S. STOP TIME:
S.STOP DEPTH:
DEEP STOP:
WATER:
DIVE MODE:
b
A C D
ExIT
NExT
ENTRY
+
_
BUL
93/93
3
5
OFF
SALT
SCUBA
For iX3M Tech+ iX3M Reb
To Next Page
Loading...
