Ravas iForks - Using the iForks: Zeroing and Level Correction; Check Zero Reading Before Weighing

USER MANUAL – iForks
15
a
OK
F2e2e1 e3 F1
Check the zero reading
before each weighing!
Before each weighing it is
necessary to check if the system
in without a load and does not
make contact with other
obstacles
When de indicator doesn’t show
automatically the zero, then a
manual zero correction has to be
done by pressing short on the
key: >0<
e1 e2 e3 F1 F2
NET
ID CODE PT TOTAL PCS KG/LB
CLR
6.1.1 Check the zero reading before each weighing
6.2 Level correction (option)
NTEP: OK if α = +/- 5% ( 3˚)
OIML: OK if α = +/- 5˚
Legal for trade:
OK
> α