Ravas iForks - 6.12. Changing the Time and Date on the Printout

USER MANUAL – iForks
33
6.12. Changing the time and date on the printout
If the weighing system has been equipped with a printer, and an option board, the date and time can
be printed together with the weight information.
 Press the key for 6 seconds.
 The display will show “ho_00” or the previous hour time setting
 The right digit flashing.
 To accept the old value press ENTER ().
Or
 Press the  key to go up a value or press the  key to go down a value until the required value is
reached.
 Press  to change to the next digit and use the  or  key to change the value until the required
value is reached.
 To accept the new value press ENTER ().
 The display will show “m_00” or the previous minute time setting.
 The right digit flashing.
 Repeat the above procedure to accept or change the minute setting.
 The display will show “dA_00” or the previous date of the month setting
 The right digit flashing.
 Repeat the above procedure to accept or change the date of the month setting.
 The display will show “m_00” or the previous month setting.
 The right digit flashing.
 Repeat the above procedure to accept or change the month setting.
 The display will show “YE_00” or the previous year setting.
 The right digit flashing.
 Repeat the above procedure to accept or change the year setting.
 The indicator will return to normal weighing mode.