DECLARATION OF CONFORMITY
Issued by: RAVAS Europe B.V.
Toepadweg 7
5301 KA Zaltbommel
The Netherlands
In accordance with the requirements of:
EMC Directive 2004/108/EC
Council Directive 2009/23/EC, only for OIML Class III
approved systems
Forks are produced according to international standards:
ISO 2328
ISO 2330
EN 1726-1, paragraph 5.6.5
In respect of: a non-automatic weighing instrument
Manufacturer: RAVAS Europe B.V.
Model: iForks
Description: weighing forks
This declaration of conformity is valid when the above-mentioned instrument is marked with
the CE mark. The instrument is verified in the factory and may be used immediately.
We, RAVAS Europe B.V., declare under our sole responsibility that this weighing system is in
conformity with the directives and standards mentioned.
H.P.M. van Seumeren
Technical Director
To Previous Page
Loading...
