Ravas iForks - Placing Battery Modules in the Iforks; Switching on the Iforks

USER MANUAL – iForks
8
1.
4.
2.
3.
4.3 Placing the batterypacks in the iForks
1. Lift up the locking clips on the battery holders.
2. Position the batterypacks in both forks.
3. Click the batterypacks into the battery holders.
4. Push the locking clips down to secure the batterypacks.
4.4 Switching on the iForks
1. Switch on the forks by
pressing the blue buttons on
both batterypack holders.
1.
2.
LED
2. The blue LED’s on the
iForks will start blinking
automatically.