2
P/N 016-5032-114 Rev. A 9
INTRODUCTION
Bracket - WAS Arm Mounting 116-0159-674 1
Plate - Electrical Bulkhead Cover 107-0172-193 1
Cable - Steering Valve Harness 115-4001-140 1
Cable - RS1 HDU Harness 115-4010-063 1
Cable - RS1 Harness 115-4010-064 1
Cable - 4-Wheel Steering Lockout 115-4010-073 1
Sensor - Rotary Wheel Angle 063-0181-013 1
Switch - Master 063-0173-961 1
Transducer - 0-3000 PSI Pressure 422-0000-086 1
Latch - Over-Center Padlock 319-1000-015 5
Screw - #6-32 Zinc Torx 311-0004-107 2
Bolt - 1/4”-28 x 3/4” Hex 311-0051-103 2
Bolt - 5/16”-18 x 7/8” Hex 311-0052-104 4
Bolt - 5/16”-18 x 2” Hex 311-0052-109 1
TABLE 1.
RS1 HD Installation Kit (P/N 117-5032-114)
Item Description Part Number Qty.
To Next Page
Loading...
Need help?
General
