Slingshot Field Hub 2.0 I V1.0
Slingshot Field Hub 2.0-EN-V1.0 I Pag 6/16
•
CORS Network:
Enter the Correction Data
Supplier.
•
Correction Format:
Choose the format of
the Correction Signal.
•
Mount point:
Choose the mount point or
stream of the network.
•
Username:
Type the username of the
CORS network for the customer.
•
Password:
Type the password of the CORS
network for the customer.
•
Dealer PO#
: Fill in 0000.
After the data has been entered, select
Save Device
and
press
next
. A new wizard with the active information is
opened (Figure 6). After a check of the entered data press
next
again.
Figure 6 Activate information.
Figure 5 Step 2 activation procedure Slingshot field
hub (
continuation).
To Next Page
Loading...
