Slingshot Field Hub 2.0 I V1.0
Slingshot Field Hub 2.0-EN-V1.0 I Pag 7/16
Step 3 of the activation is to add a customer to the
Slingshot Field Hub. At the top of this step is the name of
the dealer, please check this before a customer is added.
If the name of the dealer is correct, fill in the customer
information. When the customer is already a Slingshot
Customer, you can search in the list of existing customers.
When it is a new Slingshot customer, enter the information
(Figure 7). It is needed to fill in all the information before
the step can be finished. Select
Next
on the bottom of the
screen, in the last step (
Step 4, Figure 8)
nothing has to be
entered. Select
Finish
to close the activation procedure.
Figure 8 Step 4 of the activation procedure
Figure 7 Step 3 of the activation procedure
To Next Page
Loading...
