Operation
Document Loading Tips
Before using the ADF (Auto Document Feeder), please make sure that your
paper meets the following specifications:
● Document(s) can range in size from 50 x 50 mm (2 x 2 in.) (A8) to 216 x 356 mm
(8.5 x 14 in.) (Legal).
● Document(s) can range in weight from 7 to 110 lbs (27 ~ 413 g/m2)
● ID cards up to 1.25 mm (0.05 in.) thick
● Document(s) should be square or rectangular and in good condition (not fragile
or worn).
● Document(s) should be free of curl, wrinkle, tears, wet ink, or punch holes.
● Document(s) should be free of staples, paper clips, paper sticky notes.
Loading Document(s) in the ADF
Document Feeding
1. Load the stack of document face down with the top of the
pages pointing into the feeder.
2. Verify that the paper guides are aligned with the edges of the
stack by sliding the paper feed guides in the automatic feeder
tray.
Feeding Tips
To avoid occasional multi-feeds or paper jams, please fan your
documents and align the top edges before feeding them into the
scanner.
1. Hold both ends of the documents and fan them a few
times.
2. Rotate the documents by 90 degrees and fan them in the
same manner.
3. Align the edges of the documents in a step-like pattern
(see picture).
14
To Next Page
Loading...
