9
Viper Pro Software Update
Note: Software version 3.5.0.21 or newer is required to utilize the automatic
power down feature with the field computer. The USB flash
drive (P/N 063-0173-427) provided in the field update kit contains a
software update file compatible with the automatic power down feature.
Software updates are also available from the Raven Applied Technology
Division web site:
www.ravenhelp.com
Refer to the Viper Pro Installation and Operation Manual for additional
information on applying software updates obtained from the web site.
1. Insert the provided USB flash drive (P/N 063-0173-427) into the Viper Pro.
2. Press the power button on the Viper Pro field computer.
3. Touch the ‘Display Program List’ button when the following prompt is displayed.
4. On the Program Selection Menu, touch the ‘Install Viper Pro’ option.
Allow the field computer the field computer to complete the software update.
5. Restart the Viper Pro management system.
6. From the main Viper Pro screen, select the Menu button in the lower, right
corner of the display and select About.
7. Verify that software version 3.5.0.21 or newer is shown. If so, the software
update has been successful.
Review the Viper Pro Installation and Operation Manual for more information on
the automatic power down feature.
To Next Page
Loading...
