CHAPTER 3
14 VSN Installation Manual for RBR Vector Ventuir/Vortex, MY18+
14. Ensure that the VSN Visual Guidance rectangular mounting arm is square and level to the machine.
15. Securely tighten all installed hardware.
16. Assemble the VSN Visual Guidance camera brackertry using the provided M8 hardware.
a. Qty. 1 – 116-0159-837 – VSN Mount.
b. Qty. 1 – 107-0172-642 – VSN Debris Shield.
c. Qty. 4 – 313-5001-007 – Rubber Isolator.
d. Qty. 4 – 311-4055-180N – M8 x 25MM Bolt.
e. Qty. 4 – 313-6001-013N – M8 Lock Washer.
f. Qty. 4 – 313-6000-013N – M8 Flat Washer.
FIGURE 9. Camera Assembly
17. Mount the VSN Visual Guidance camera assembly to the installed camera mounting bracket (116-0159-834)
using the provided M8 hardware.
a. Qty. 4 – 311-4055-180N – M8 x 25MM Bolt.
b. Qty. 8 – 313-6000-013N – M8 Flat Washer.
c. Qty. 4 – 312-6001-027N – M8 x 1.25 Nylock Nut.
To Next Page
Loading...
