Rayburn 680KCD C - User Manual

05/14A EINS 516258
PLEASE READ THESE INSTRUCTIONS BEFORE SERVICING THIS APPLIANCE
680KCD C/F
780KCD C/F
Servicing
Instructions
DESN 516260 DESN 516828
For use in GB & IE
REMEMBER, when replacing a part on this appliance, use only spare parts that you can be assured conform to the
safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly
authorised by AGA.

Summary

Service Schedule and Procedures

Annual Service Tasks

Details annual service requirements including oil line, nozzles, seals, wiring, burner, pump, and re-commissioning.

Burner Removal and Access

Preparation for Burner Removal

Burner Access Procedures

Boiler Burner Removal

Cooker Burner Removal

Burner Servicing Procedures

Burner Nozzle Removal

Burner Nozzle Replacement

Oil Pump Servicing Procedures

Oil Pump Strainer Cleaning

Oil Line Filter Cleaning

Re-commissioning Steps

Bleeding Air and Fitting Pressure Gauge

Procedures for bleeding air from the oil supply and fitting a pressure gauge.

Electricity, Venting and Pressure Adjustment

Switching on electricity, venting the oil pump, and adjusting oil pressure.

Setting Combustion Air

Adjusting boiler burner air intake for correct CO2 levels.

Checking Smoke Levels

Burner Component Replacement

Fan Motor Replacement

Ignition Electrodes Replacement

Pump Access and Replacement

Electrical Component Access and Re-assembly

Electrical Component Access

Fault Finding Overview and Wiring Diagram

Rayburn 600;700 Wiring Diagram

Burner Does Not Start Troubleshooting

Troubleshooting steps for when the burner fails to start, including lock-out causes.

Error Table: Locking Errors

Error Table: Blocking Errors

Cooker Burner Fault Diagnosis (DKO 970) - Information System

Information system communication via LED flash codes for burner status.

DKO 970 Control Box Error Diagnosis

Interpreting LED illumination sequences for error diagnosis.

Cooker Burner Fault Diagnosis (DKO 970 N) - Information System

Information system communication via LED flash codes for DKO 970N.

Blinkcode Dxx-N Interpretation

Interpreting blink codes for normal operation and lock-out conditions.

Boiler Burner Troubleshooting Flowchart

Step-by-step troubleshooting guide for boiler burner operational issues.

Cooker Burner Troubleshooting Flowchart

Step-by-step troubleshooting guide for cooker burner operational issues.

High Smoke Number and Oil Smell Causes

Troubleshooting common causes for high smoke and oil smells.

Rayburn 680KCD C Specifications

General

Depth	600 mm
Hotplate	Yes
Type	Range Cooker
Number of Ovens	2
Number of Hob Burners	4
Grill	Yes
Energy Rating	A